Equipment developed as a result of intensive R & D and
confirming to International Standards, suitable for most
of environmental conditions, calibration, validation &
Humidity Control Oven for above ambient conditions.
Construction
Double walled, inner S.S.304 / 316* grade & outer S.
Steel or GI dully Epoxy Powder coat / finish, gap filled
with Glass wool insulation (PUF in situ foam*) Inner
full length viewing glass / plexi door or viewing window
on outer metallic door provided. (To select while
ordering) Leak proof positive locking arrangement for
door. Chamber illuminated with bulb.
Cooling -CFC free* Refrigeration
By Hermetically sealed brand new ISI marked compressor
coupled with air cooled condensing unit fitted with
Motor, fan blade, Electrical Accessories etc.. Mounted
on bottom of unit on heavy base frame.
Humidity
Humidity Created with Steam & Injection into working
chamber.
Heating
By long lasting S. Steel Tubular Heater with fins.
Temperature Control
Electronic Digital Temperature Controller-Cum Indicator
with Dry Bulb & Wet Bulb Principle. (Direct %RH setting
optional)
|
Model |
Working Size |
Cap. Cft. Ltrs. |
|
HTC 3 |
a) 40 X 40 X 57 cms |
( 3 Cft / 90 Ltrs ) |
|
HTC 6 |
b) 50 X 50 X 70 cms |
( 6 Cft / 175 Ltrs ) |
|
HTC 10 |
c) 57 X 57 X 88 cms |
( 10 Cft / 285 Ltrs ) |
|
HTC 12 |
d) 60 X 60 X 95 cms |
( 12 Cft / 90 Ltrs ) |
|
HTC 16 |
e) 70 X 70 X 90 cms |
( 16 Cft / 450 Ltrs ) |
|
( Bigger Size / Walk-in-Humidity Chamber on
request. ) |
Humidity Oven
( Above Ambient test ) |
Environment Chamber
( * with cooling facility) |
|
Temp. Range Ambient + 5° C to 60° C |
10 °C to 60° C |
|
Humidity Range Ambient 90-95% RH |
40 to 95% RH |
Accuracy - Temp + 10C or better
RH + 5% or better |
+ 10C or better
+ 3% or better |
Optional :
1) Strip Chart Recorder for Dry & Wet Bulb or Dry &
%RH
2) Higher Temperature Upto 700C ( RH ranges as Std )
3) Complete S. Steel Unit / GMP Models.
4) Any other sizes or other temperature range
available on request.
5) Micro controller based PID Controller with
Printer Interface (Centronic Port) compatible
with EPSON / WIPRO
6) Micro controller based PID Controller with RS-232
C PC Interface / RS-485
Interface for multiple networking of controller.
7) mP Profile Controller for cyclic applications
(Ramps & Soak)
Ask Details for
Programmable / Cyclic Chamber / Stability Chamber. (
* Optional )
Due to continues R & D model / specifications may
change.
Picture shown with optional accessories.
